8 Teac models. Find yours below, or send us a hack if it's missing.
Open the players tray
Enter 2 1 6 8 using the Remote Control, followed by OK
Enter the region code e.g. 1 for Region 1, 2 for Region 2 etc. enter 9 for Region free (Use the Enter key to cycle through the Regions)
If the above region selection code doesn't work then try 0 for region free
Empty the Disc Drawer
Press Setup on the remote
Press 1 3 6 9, Left, Left, Left, Right (keypad)
Use Up and Down to change region. Set to 0 for region free
Exit Setup
Empty the Disc Drawer
Press Setup on the remote
Press 1 3 6 9, Left, Left, Left, Right (keypad)
"Version" will appear on the Menu, scroll down to this
Once in "Version" go to Region and go across to the number and change to 0 for Multi-Region. Use the keypad to change the zones
Then exit Version and Setup
Open disc tray
Press Setup
Press Vol +, Vol -, Vol +, Vol - then Mute
Select Region by pressing < or > on remote
Region 256 is region free
Turn On power and using the remote Open the tray
Push Clear, 2 5 8 0 and Clear keys in order
Unit enters into test mode. "TESTMODE" is displayed on FL Display and some numbers are displayed on TV screen
Under most line on the TV screen, some numeric are displayed as "08 - XX XX XX XX AA BB CC" Region 0. Should be set so that AA = 23, BB = 23, and CC = 00
If the settings (AA = 25, BB = 23, CC = 02) are correct, Push Return key twice. Tray is Closed and unit exits from Test mode
If the above settings are incorrect, correct the setting as follows:
Push Up or Down so that "12 XX" is Displayed on FL display
Press 2 and 3 in order so that "12 23" is displayed on FL Display
Press Select key of remote control unit
Push Up or Down so that "13 XX" is displayed on FL display
Press 2 and 3 key in order so that "13 23" is displayed on FL Display
Press Select key of remote control unit
Push Up or Down so that "14 XX" is displayed on FL display
Press 0 and 0 keys so that "14 00" is displayed on FL Display
Press Select key of remote control unit
Confirm "08 - XX XX XX XX 23 23 00" is displayed at under most line on the TV screen
Push Return key twice. Tray is closed and unit exits from Test mode.
Open the disc tray
Press 3 8 3 8 on the remote
A service menu will appear
Select the required region, i.e. 1 for 1, 2 for 2 and so on. Use 9 for region free
Macrovision can also be disabled from the menu
Close the disc tray
Power on the player and Open the tray
Enter 8 1 3 2 8
Enter the region code e.g. 1 for Region 1, 2 for Region 2 etc. enter 0 for Region free (Use the Enter key to cycle through the Regions)
Close the tray
Ensure TV monitor is On and set to display DVD
Turn system completely Off
Turn On system and Open tray
Using remote press and hold the Return button
Whilst holding the Return button, press and hold the Display button
You will see something similar to VER 1006 TE 3210 on the screen
Release Display and Return buttons simultaneously
Press the Angle button
You will see WRITING REGION ID displayed
Player should now be region free