5 Marantz models. Find yours below, or send us a hack if it's missing.
NOTE: Please note that this conversion may only work a maximum of 25 times! After this time the machine may end up locked to the last region changed to
Turn On without a disk in the tray and wait for "No Disk" on font panel display
Key in on the Remote Control, press Pause, then 3 1 4 1 5 9
The word COdE is displayed on the front panel
Key in the number of the Region you want to use, or 0 for Multi-Region
Then press Pause again
NOTE: Please note that this conversion may only work a maximum of 25 times! After this time the machine may end up locked to the last region changed to
Turn On the player with no disc in the tray
Press Dimmer (on front panel)
Press Previous (on front panel)
The display should show 4 dashes
Press 1 9 9 9
Enter 01 for Region 1, 02 for Region 2, 04 for Region 3, 08 for Region 4, 10 for Region 5, 20 for Region 6 or 00 for Region free
Press Enter
Turn power Off and On
Send the infra-red code RC6 (aka Codeset 4, Key 235) to your player. You can do this with a OneForAll
NOTE: Please note that this conversion may only work a maximum of 25 times! After this time the machine may end up locked to the last region changed to
Turn On the player with no disc in the tray
Press Next (on front panel) and Previous (on front panel) at the same time
The display shows Region 2
Press Stop (on front panel) for 5 seconds
The display now shows Region 0
Press Play (on front panel)
The display should show Region 0 OK
Turn power Off and On
NOTE: Please note that this conversion may only work a maximum of 25 times! After this time the machine may end up locked to the last region changed to
Region One Hack:
Press the buttons Play, 2 7 4 on your remote control. The onscreen display should look like this: '____ ____'
Using the number keys on your remote control, enter the code 0 0 5 0 0 0 1 2 8 1 5 6
Press the Play button on your remote control
The onscreen display should turn red, indicating that your region settings have been changed
Return to Region Two Hack:
Press the buttons Play, 2 7 4 on your remote control. The onscreen display should look like this: '____ ____'
Using the number keys on your remote control, enter the code 0 0 2 0 0 0 1 2 8 1 5 6
Press the Play button on your remote control
The onscreen display should turn red, indicating that your region settings have been changed
Factory Reset to Region Two:
Press the buttons Play, 1 5 9 on your remote control. The onscreen display should look like this: '____ ____'
Using the number keys on your remote control, enter the code 004001 00014 0
Press the Play button on your remote control
The onscreen display should return to the original Philips splash screen, all settings will be reset back to factory defaults