Denver region-free hacks

1. Change to DVD mode and open the disc tray

2. Press 0 0 0 0

3. Change Region (9 = region free)

4. Press OPEN/CLOSE to save the settings

Power on the unit and open the DVD door by pressing

the "Open" button on the front panel

Press Setup

Use Remote Control to enter the following numbers 3 3 0 8 8

You will see in the top left of the screen "****" appear

Key in a number corresponding to the Region you desire your player to be set to, i.e. 1 for Region 1, 2 for Region 2 and so on, use 0 for Region free

Open the tray by pressing the button on the fascia

Use Remote Control to enter the following numbers 3 3 0 8 0

Press Play on the remote

The tray will close

1. Press EJECT

2. Type in 7 7 3 9, followed by the region (0 for region free)

3. Close

VCD/CVD/SVCD/XVCD/XSVCD playback

1. Turn device on

2. Go to Setup

3. Enter 1 1 0 (or 1 1 9)

4. Turn the power off and on again

1. Press SETUP

2. Enter 2 1 8 8

3. Open "Version"

4. Enter Code - Europa=2, Free=0

Ensure DVD in Stop mode and using the remote press Setup

Using remote press 1 3 6 9 (for the newer model enter 1 3 7 9)

Press Left arrow 3 times and then press Right

A Version menu will appear

Select Version menu and then select 0 for All for all regions

Open the tray

Press Setup then 1 3 7 9

Change region code with arrows (0 for region free)

1. Press OPEN

2. Type in 9 7 3 5, followed by the region (0 for region free)

3. Close

1. With no disc in the tray, key in 0 0 8 6 0 0 0 on the remote

2. Press SELECT on the remote

3. Then power the recorder off

1. Open Tray

2. Select with the Remote '9 7 3 5'

3. Select REGION '0' for Multi-region

. Press SETUP, highlight the 'General' setup page

. Press 1 3 6 9, choose the region

. Press ENTER, Setup

1) Enter DVD Mode

2) Open the DVD tray

3) Press 'stop' two times

4) Enter '1' '9' '9' '9' (slowly)

5) A menu appears. Change the region.

6) Close the DVD tray.