Denon region-free hacks

1. Turn the unit on

1. Open the disc tray using the remote

1. Ensure there is no disc in the player.

2. Power off using the front panel On/Off button (not standby).

3. Press and hold Open/Close, Play and Skip Reverse (I<<).

4. Keep the above buttons held and Power-Up the player using the On/Off button, holding the above buttons

until the player's name disappears from the front panel.

5. Wait until the player finishes LOADING and the front panel of the player shows 0:00:00.

6. On the remote handset, press in sequence; 7 3 1 9 4 6 2 8

7. The unit should enter standby mode. On the front panel of the player, press the Standby button to turn the

player back on.

8. To confirm the update, press on the front panel Stop and Skip Forward (>>I). The front panel should briefly

display “Region_A2”. If not, then repeat the process 1-7 above.

This hack needs no firmware upgrade.

1. Open the disc tray

2. Press SETUP

3. Go to "Disc Language"

4. Press ENTER

5. Select the first entry

6. Press ENTER

7. A 4-digit code can be seen

8. Enter desired RC (010X / X=RC)

9. Go back to the main menu

10.Insert a DVD

11.Turn the player off

12.Turn the player on (after 20 secs)