14 Coby models. Find yours below, or send us a hack if it's missing.
1. Press SETUP
2. Press VOL+, VOL-, VOL+, VOL-
3. Current RC should be displayed
4. Select the RC with RIGHT and LEFT (255=Codefree)
5. Press SETUP
6. Turn the player off
Method 1:
1. Press SETUP
2. Press 2 1 8 8
3. A new menu entry appears (Version)
4. Select it
5. Press ENTER
6. Select "Region" with RIGHT
7. Select RC with UP, DOWN (0=codefree)
8. Press SETUP
9. Turn the player off
Method 2:
1. Press SETUP
2. Press VOL+, VOL-, VOL+, VOL-
3. Current RC should be displayed
4. Select the RC with RIGHT and LEFT (255=Codefree)
5. Press SETUP
6. Turn the player off
1. Open the disc tray
2. Press 2 8 1 2
3. Press PLAY/ENTER until 9 is shown
4. Close the disc tray
1. Open the tray
2. Press SETUP, 9 8 7 0
3. Turn the player off
1. Open the disc tray
This one was cut short in our records. If you know the rest of the steps,send them in and we'll complete it.
1. Open the disc tray and enter 0 0 0 0 - you see the current region
2. Keep pressing the 'Enter' key until region '9' appears. This should make your player region free.
Some models needs to be followed by the next step (3.)
3. Press SETUP, Setup, Off
1. Turn the player on (without a disc inserted)
2. Press STOP 2 x
3. Press SUBTITLE 5 x
4. Press the button for the desired RC (0=codefree)
1. With no disc in the tray, key in 0 0 8 6 0 0 0 on the remote
2. Press SELECT
3. Then power the recorder off
1. Power on
2. Open disk tray (leave open, closed with no disk in might work too)
3. With remote press SETUP, them VOL+ VOL- VOL+ VOL-.
4. On the top right side of the screen your region code will appear
5. Use the left and right nav keys on the remote to switch between regions, and 255 for region free.
6. Press Setup (You may not need to do this)
Failing that:
1. Turn unit on with remote
2. With NO DVD in the tray -
3. Press TITLE then 1 then 9
4. A grey box will appear in the center of the screen with your region number in the middle
5. Using up/down arrows change to desired region (0 for REGION FREE)
Press “Setup”
Press Vol +, Vol-, Vol +, Vol -,
Region number will appear
Change the region code by using RIGHT arrow.
Press “Setup” to exit.
1. Open the tray
2. Press SETUP, 8 4 2 1
3. Turn the player off
1. Turn the DVD player ON
2. Press the SOURCE button until the player is in 'DVD' mode
3. Ensure the DVD player is EMPTY and EJECT any DVD that may be in
4. Press the DVD SETUP button (a menu should appear)
5. Press the RIGHT ARROW button four times
(You should now see the "Preference Page" menu)
6. Press the numbers 3 3 0 8
(A menu should appear displaying the player's current region code)
7. Press the DOWN ARROW button until the number '0' appears
8. Press the OK button to save settings
9. Press the DVD SETUP button to exit the menu
1. Press SETUP
2. Press FFW, F REW, NEXT, PREVIOUS
3. Change the code to 255 using the RIGHT arrow key
1. Turn the player on (without a disc inserted)
2. Press SETUP
3. Select "Preferences"
4. Press 1 3 7 9
5. Select RC
6. Press ENTER
7. Press SETUP again