Bush DVD 2004 region-free hack

Turn the system on and place a DVD in it, play the DVD, then press stop,

resume stop should appear, then press set up on your remote control, a set

up display should appear on your screen. which has Language, Scart out,

Audio, TV.Type, TV.Sys, with options chosen next to each one, press down on

the remote untill TV.Sys is highlighted, mine was set as PAL60, press

select, to change the setting from PAL60, to one of the following (PAL60R -

AUTO - NTSC - PAL) choose AUTO to make it region free, or NTSC to play

region 1 discs, or just change it back and forth when wanting to play a

different region disc.

Press the Open button on your remote control to open the tray.

Press the 7 button on your remote control.

Press the Enter button on your remote control.

Press the 7 button again on your remote control.

You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free by entering 13 as the country code. You can also disable Macrovision from this menu.

You can also try this if the above fails:

Press Open on the Remote Control

Press 2 0 0 1

The player should now be in Multi-Region mode

If you have the "A" revision of this player try:

Open the tray type in and from the Remote key in 3 3 0 8 8

Then press 1 for Region 1, 2 for Region 2 etc. Use 0 for all Regions

Close tray to complete