SAMSUNG 511
Make sure the player is switched on, and is at the Samsung logo
screen. Also check the tray is shut and that there's no disc in the
player.
Now press the REPEAT button on the remote, followed by a five digit
code. This code is different depending on what region your player is
*currently* set to:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
So for example if you have an R2 player, press REPEAT-3-8-7-6-7.
If you've done this correctly (and your player is compatible with the
hack), you should see a number at the top left corner of the screen
corresponding to the current region.
Now, pressing any number from 1 to 6 will change to the corresponding
region. Or, press 9 for auto-region mode.
Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD
POWER) on the remote to close it and put the player into Standby mode.
The next time you turn your player on, the new region will be set.
Don't forget that if you want to hack it again, you'll need to use a
different code, as listed above. If it's currently set to region 9,
use the code for the last *proper* region you set it to.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG 709
Make sure the player is switched on, and is at the Samsung logo
screen. Also check the tray is shut and that there's no disc in the
player.
Now press the REPEAT button on the remote, followed by a five digit
code. This code is different depending on what region your player is
*currently* set to:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
So for example if you have an R2 player, press REPEAT-3-8-7-6-7.
If you've done this correctly (and your player is compatible with the
hack), you should see a number at the top left corner of the screen
corresponding to the current region.
Now, pressing any number from 1 to 6 will change to the corresponding
region. Or, press 9 for auto-region mode.
Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD
POWER) on the remote to close it and put the player into Standby mode.
The next time you turn your player on, the new region will be set.
Don't forget that if you want to hack it again, you'll need to use a
different code, as listed above. If it's currently set to region 9,
use the code for the last *proper* region you set it to.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG 809
Make sure the player is switched on, and is at the Samsung logo
screen. Also check the tray is shut and that there's no disc in the
player.
Now press the REPEAT button on the remote, followed by a five digit
code. This code is different depending on what region your player is
*currently* set to:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
So for example if you have an R2 player, press REPEAT-3-8-7-6-7.
If you've done this correctly (and your player is compatible with the
hack), you should see a number at the top left corner of the screen
corresponding to the current region.
Now, pressing any number from 1 to 6 will change to the corresponding
region. Or, press 9 for auto-region mode.
Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD
POWER) on the remote to close it and put the player into Standby mode.
The next time you turn your player on, the new region will be set.
Don't forget that if you want to hack it again, you'll need to use a
different code, as listed above. If it's currently set to region 9,
use the code for the last *proper* region you set it to.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG 909
Make sure the player is switched on, and is at the Samsung logo
screen. Also check the tray is shut and that there's no disc in the
player.
Now press the REPEAT button on the remote, followed by a five digit
code. This code is different depending on what region your player is
*currently* set to:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
So for example if you have an R2 player, press REPEAT-3-8-7-6-7.
If you've done this correctly (and your player is compatible with the
hack), you should see a number at the top left corner of the screen
corresponding to the current region.
Now, pressing any number from 1 to 6 will change to the corresponding
region. Or, press 9 for auto-region mode.
Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD
POWER) on the remote to close it and put the player into Standby mode.
The next time you turn your player on, the new region will be set.
Don't forget that if you want to hack it again, you'll need to use a
different code, as listed above. If it's currently set to region 9,
use the code for the last *proper* region you set it to.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG 611
Make sure the player is switched on, and is at the Samsung logo
screen. Also check the tray is shut and that there's no disc in the
player.
Now press the REPEAT button on the remote, followed by a five digit
code. This code is different depending on what region your player is
*currently* set to:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
So for example if you have an R2 player, press REPEAT-3-8-7-6-7.
If you've done this correctly (and your player is compatible with the
hack), you should see a number at the top left corner of the screen
corresponding to the current region.
Now, pressing any number from 1 to 6 will change to the corresponding
region. Or, press 9 for auto-region mode.
Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD
POWER) on the remote to close it and put the player into Standby mode.
The next time you turn your player on, the new region will be set.
Don't forget that if you want to hack it again, you'll need to use a
different code, as listed above. If it's currently set to region 9,
use the code for the last *proper* region you set it to.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG 811
Make sure the player is switched on, and is at the Samsung logo
screen. Also check the tray is shut and that there's no disc in the
player.
Now press the REPEAT button on the remote, followed by a five digit
code. This code is different depending on what region your player is
*currently* set to:
R1 - 29334
R2 - 38767
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462
So for example if you have an R2 player, press REPEAT-3-8-7-6-7.
If you've done this correctly (and your player is compatible with the
hack), you should see a number at the top left corner of the screen
corresponding to the current region.
Now, pressing any number from 1 to 6 will change to the corresponding
region. Or, press 9 for auto-region mode.
Next, press OPEN/CLOSE to open the tray, followed by Standby (or DVD
POWER) on the remote to close it and put the player into Standby mode.
The next time you turn your player on, the new region will be set.
Don't forget that if you want to hack it again, you'll need to use a
different code, as listed above. If it's currently set to region 9,
use the code for the last *proper* region you set it to.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-707
Insert a region 1 DVD. The player will then attempt to load it. The tray should then open itself up and the display should read 'NO DISC'. Press the following: DVD/TV, TIME SEARCH, 1, 1, and 9. Load up your region 1 disc. If it doesn't load, repeat the hack with the key press changed to DVD/TV, TIME SEARCH, 2, 0, 0. The DVD player should now be multi-region. To change your player back repeat the hack except using a region 2 disc.
Taken From: DVD Player Handset Hacks List (Region 2)MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-807
Insert a region 1 DVD. The player will then attempt to load it. The tray should then open itself up and the display should read 'NO DISC'. Press the following: DVD/TV, TIME SEARCH, 1, 1, and 9. Load up your region 1 disc. If it doesn't load, repeat the hack with the key press changed to DVD/TV, TIME SEARCH, 2, 0, 0. The DVD player should now be multi-region. To change your player back repeat the hack except using a region 2 disc.
Taken From: DVD Player Handset Hacks List (Region 2)MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-907
Insert a region 1 DVD. The player will then attempt to load it. The tray should then open itself up and the display should read 'NO DISC'. Press the following: DVD/TV, TIME SEARCH, 1, 1, and 9. Load up your region 1 disc. If it doesn't load, repeat the hack with the key press changed to DVD/TV, TIME SEARCH, 2, 0, 0. The DVD player should now be multi-region. To change your player back repeat the hack except using a region 2 disc.
Taken From: DVD Player Handset Hacks List (Region 2)MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG HT-DM150, HT-DM550, HT-DS400, HT-DB600, HT-WP38
Switch Off player and Unplug from mains wait 30 seconds
Reconnect to mains
Turn On player with remote
Press Enter on the remote
Press 8, 4, 2, 6 and 9 on the remote
Press Enter on the remote
The tray will Open and player will power Off and Close tray
Switch On power from remote
Player is now Region FreeMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-M107
Multi-region Codes 1
Perform a cold start
Power On the player and press Play and Next on the DVD player (note that that you can also press Play and Next on the Remote Commander)
The language options pop up. Release the Play and Next buttons
Select the language between 1 and 6
Multi-region Codes 2
Press the Repeat button on the Remote Commander
Using the Remote Commander, enter the code below corresponding to the region that your player is currently set to
for Region 1 use: 2, 9, 3, 3 and 4
for Region 2 use: 3, 8, 7, 6 and 7
for Region 3 use: 5, 6, 7, 3 and 2
for Region 4 use: 7, 6, 8, 8 and 4
for Region 5 use: 5, 3, 8, 1 and 4
for Region 6 use: 2, 4, 4, 6 and 2
The current region setting of your player will display on the screen of the TV
Press 9 on the Remote Commander for a Region free setting
Press Open and load a DVD (of a region setting that your dvd player could not play previously).
Stop and power OffMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-S124
Leave disc tray empty.
Power Up player.
Press Play and Stop on player simultaneously for around 3 seconds
A language screen should appear.
Press Repeat on remote then 7, 6, 8, 8 and 4
Press 9 for region free player.
Press the Open button on player.
After 15 sec press Power/Standby on remote.
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-S224
Turn on the player and ensure that there is no disc in the machine
Using the remote, in quick succession press Menu, Repeat
Press 7, 7, 6, 8, 8, 4, 9 then Open/Close
Count up to fifteen before powering off the player with the remote
If the above code fails to work then you may want to try the following code:-
Press the Repeat button on your remote control NB: Do not confuse this with the Repeat A-B button
Press the buttons 5, 7, 5, 3 and 8 on your remote control, in order one at a time
The numbers 02 will be displayed on the top left of your onscreen display
Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 9 for multi-region playback
Press the Open button on your remote control
After 15 seconds have elapsed, power off your player and then power on your player
The above steps need to be performed fairly quickly (Although not VERY quickly)MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-611, DVD-709, DVD-711, DVD-809, DVD-811, DVD-909, DVD-MC20, DVD-M105, DVD-M108, DVD-M203, DVD-M204, DVD-M205, DVD-M405, DVD-HD937
Multi-Region Code 1:
Always perform a Cold Start before applying the hack
Power On your player whilst pressing hold both the Play and Stop buttons on the front player
After a short while you should be presented with a set of language options. Release the Play and Stop buttons on the player
You will now need to select a language option between 1 and 6
Multi-Region Code 2:
Press the Repeat button on the Remote Control
Using the Remote enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate
for Region 1 use 2, 9, 3, 3 and 4
for Region 2 use 3, 8, 7, 6 and 7
for Region 3 use 5, 6, 7, 3 and 2
for Region 4 use 7, 6, 8, 8 and 4
for Region 5 use 5, 3, 8, 1 and 4
for Region 6 use 2, 4, 4, 6 and 2
A code should be displayed on the screen indicating the current Region setting of your unit
Press the 9 button on the Remote Control for Region free, or 1 for Region 1, 2 for Region 2 and so on
Press the Open button on your player
Press the Standby button on the Remote Control
Firmware Version 5.02E:
Power on your player
Press and hold both the Play and Stop buttons on the player itself
After a short while you should be presented with a set of language options. Release the play and the stop buttons on the player
You will now need to select a language option between 1 and 6
Press the Repeat button on your Remote Control
Now using your Remote Control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate, for Region 2 use 5, 7, 5, 3, 8 instead of 3, 8, 7, 6, 7
A code should be displayed on the screen indicating the current Region setting of your unit
Press the 9 button on your Remote for Region free, or press 1 button for Region 1, button 2 for Region 2 and so on
Press the Open button on your player
Press the Standby button on your Remote Control
Further information has emerged for the very latest players. The only drawback with the below is that it isn't held when the player is switched off. You also need an Aiwa remote control, our forum visitor used the Aiwa RC-7AS08:
Turn on the player
Open the DVD tray
Press Sleep on the Aiwa Remote, and you will see a cold start message on screen
Press Clock 3 times very quickly, pressing and pressing, you will see an adjust message on front of DVD player
Put any Region of DVD in and it will play
It may also work with other Samsung DVD-Mxxx models, but may not work for machines with the 5.02E firmware loaded. Try the Samsung V-5000 hack, it MAY work.
If the player sticks on FBI Warning screens:
Press Forward Search x2 or faster, the disc should skip straight to the main featureMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-M103
Turn On your DVD Player with the remote control
Press the Open/Close button on your remote control (tray will Open)
Press the Open/Close button on your remote control (tray will Close)
Press the Repeat button on remote
Using the Remote enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate
for Region 1 use 2, 9, 3, 3 and 4
for Region 2 use 3, 8, 7, 6 and 7
for Region 3 use 5, 6, 7, 3 and 2
for Region 4 use 7, 6, 8, 8 and 4
for Region 5 use 5, 3, 8, 1 and 4
for Region 6 use 2, 4, 4, 6 and 2
A code should be displayed on the screen indicating the current Region setting of your unit
Press 9 on remote for Region free, or 1 for Region 1, 2 for Region 2 and so on
Press Open on player
Press Standby on remote
If the above code doesn't work then you may wish to try the codes aboveMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-707, DVD-807, DVD-907
Press the DVD button on your remote control.
Press the Open/Close button on your remote control.
Place a Region 1 disc in the tray.
Press the Open/Close button on your remote control.
Wait until the player ejects the disc, displaying an error message and leaving the tray open.
Remove the Region 1 disc from the tray.
Press the Open/Close button on your remote control.
Wait until the display shows the words 'no disc'.
Press the buttons Time Search, 1, 1, and 9 on your remote control in order, one at a time.
Press the Open/Close button on your remote control.
Place a Region 1 disc in the tray.
Press the Open/Close button on your remote control For newer firmware, or if the above method fails to work Repeat steps 1-8 as then before 9. Press the buttons TV, 2, 0, and 0 on your remote control in order, one at a time Repeat steps 10-12 as before.
Note: Earlier firmware versions will not play The Matrix or There’s Something About Mary but can be upgraded, firmware update does not remove hack. This hack also removes Macrovision. This modification is only temporary on the DVD-907 and will need reentering once the unit is powered off.
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-M101
Insert a DVD from any Region.
Press the Play and FF buttons together. The player should ask...ENTER DVD REGION :___
Press 0 to make the player region free
This hack may also work on other Samsung players
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-S423, SV-DVD1E
Multi-Region Code 1:
Always perform a Cold Start before applying the hack
Power on your player whilst pressing hold both the FF and Pause buttons on the front player
After a short while you should be presented with a set of language options. Release the Play and Stop buttons on the player
You will now need to select a language option between 1 and 6
Multi-Region Code 2:
Press the TV View button on the Remote Control until the Samsung DVD logo appears on the on-screen display
Press the Repeat button on the Remote ControlMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG SV-DVD3E
Always perform a cold start before applying the hack below
Power On your player as normal
Press and hold both the Play and Forward buttons on the player
After a short while the words No Disc should appear from the onscreen display
Release the Play and Forward buttons on the player
Press the Subtitle and Repeat button on your remote control
Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate:
for Region 1 use 2, 9, 3, 3 and 4
for Region 2 use 3, 8, 7, 6 and 7
for Region 3 use 5, 6, 7, 3 and 2
for Region 4 use 7, 6, 8, 8 and 4
for Region 5 use 5, 3, 8, 1 and 4
for Region 6 use 2, 4, 4, 6 and 2
A code should be displayed at the upper left of the screen showing the current Region setting of your unit
Press the 9 on your remote control for Region free, or 1 for Region 1. Press 2 for Region 2, and so on
Press the Open button on your player and play disc on tray
Press the Standby button on your remote control
Press Standby again, and wait until you see the Samsung Digital logo, press the Play buttonMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG SV-DVD40, SV-DVD50
Region Free:
Power On player and ensure the tray is empty
Using the remote press Subtitle, 5, 7, 5, 3 and 8
The figure 2 should appear on your screen
Press 9 on the remote
Turn machine Off then On
Please should now be region freeMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-V5000, DVD-M408K
Multi-Region Code 1:
Always perform a Cold Start before applying the hack
Power on your player whilst pressing hold both the Play and Stop buttons on the front player
After a short while you should be presented with a set of language options. Release the Play and Stop buttons on the player
You will now need to select a language option between 1 and 6
Multi-Region Code 2: 2:
Press the Repeat button on the Remote Control
Using the Remote enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate
for Region 1 use 2, 9, 3, 3 and 4
for Region 2 use 3, 8, 7, 6 and 7
for Region 3 use 5, 6, 7, 3 and 2
for Region 4 use 7, 6, 8, 8 and 4
for Region 5 use 5, 3, 8, 1 and 4
for Region 6 use 2, 4, 4, 6 and 2
A code should be displayed on the screen indicating the current Region setting of your unit
Press the 9 button on the Remote Control for Region free, or 1 for Region 1, 2 for Region 2 and so on
Press the Open button on your player
Press the Standby button on the Remote Control
If the player sticks on FBI Warning screens:
Press Forward Search x2 or faster, the disc should skip straight to the main featureMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-S225
Press the Repeat button on your remote control NB: Do not confuse this with the Repeat A-B button
Press the buttons 5, 7, 5, 3 and 8 on your remote control, in order one at a time
The numbers 02 will be displayed on the top left of your onscreen display
Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 9 for multi-region playback
Press the Open button on your remote control
After 15 seconds have elapsed, power off your player and then power on your player
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-E137B, DVD-237, DVD-HD40
Power On with empty tray (No Disc will be displayed in the DVD control panel)
Press the Repeat button on your remote control NB: Do NOT confuse this with the Repeat A-B button
Press the buttons 5, 7, 5, 3 and 8 (2 will be displayed on the TV screen)
Press the 9 for multi-region playback (9 will be displayed on the TV screen)
Press the Open button
Close the tray on the DVD player
After 15 seconds have elapsed, power Off (switch the unit to stand-by mode) and then power On
Finished and ready to play all regionsMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG HTDL/M HOME THEATRE SYSTEMS
Power On with empty tray (No Disc will be displayed in the DVD control panel)
Press the Enter button on your remote control
Press the buttons 8, 4, 2, 6, 9 and Enter button on your remote control
Tray will Open automatically
Close the tray on the DVD player
After 15 seconds have elapsed, power Off your player (switch the unit to stand-by mode) and then power On your player
Finished and ready to play all regionsMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG V70, V85
Power On with empty tray (No Disc will be displayed in the DVD control panel)
Press Subtitle button on your remote control
Press 5, 7, 5, 3 and 8 on your remote control (2 will be displayed on the TV screen)
Press the 9 for multi-region playback (9 will be displayed on the TV screen)
Press the Open button on your remote control
Close the tray on the DVD player
After 15 seconds have elapsed, power Off your player (switch the unit to stand-by mode) and then power On your player
Finished and ready to play all regionsMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-V5500
Switch On DVD player Open disc tray
Press Subtitle then 5, 7, 5, 3 and 8
It will display the number 2 at top left corner of the screen
Press 0 then Subtitle
It will now be region freeMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
SAMSUNG DVD-1080P8
Turn on the player. Open tray. Make sure there is no disc. Press INFO. The firmware number will appear. Close tray.
Wait until no disc appears. Press INFO again. the no disc sign will disappear. Press 7-6-8-8-4. the number 4 will appear on the upper left corner. Press 9 and that number will replace the 4. Press Repeat. Turn off the player. Turn it on and it will now read any region disc. Enjoy watching!
or
Use remote control for this:
1. Make sure there is no dvd in the player
2. Turn player off and then on again
3. Press eject to open the tray
4. Press eject to close the tray again
5. Press REPEAT
6. Enter 575389
7. Press REPEAT
or
1) Turn on the player with no disc in the tray
2) Press the Open/Close button to open the tray
3) Press the info button, the firmware version shows up (mine was 080220.13.B.1080PXKEG)
4) After the version info disappears, close the tray again by pressing the Open/Close button
5) At this point, it will show no disc at the top. Press the Info button again, and this will disappear.
6) Now type the code that applies for your region (R2 is 57538). A '2' will briefly show up at the top left corner
7) Now press 9, and 9 will show up in the top left corner
8) Power off the player, and turn it on again. You'll have a multi region player
I've found the following codes at the 1080P7 hack:
R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
If one of these hacks does work for you then GREAT! please leave
us feedback and let us know on our
forum :) However, If
you have tried and tried this hack till your blue in the face and
you STILL cant get that region 1 copy of 'Michael Flatley's Lord
of the dance' to work then you still have a few options:
Use DVD hacks to search all other internet resources for your hack by entert your player model number below:
Post your problem on the forum and we will try and help.
Alternatively, choose another manufacturer from below: