HARMANKARDON DVD-1Put the player into Standby mode, with no disc in the tray
On the Remote Control press: 3, 1, 4, 1, 5, 9 and 2
Then press the zone you want: 1-4
Power the player On
Play the disc you want to
HARMANKARDON DVD-5Put the player into Standby mode with and ensure there is no disc in the tray
Key in the following on the Remote Control: 3, 1, 4, 1, 5, 9 and 2
Now key in the number of the Region you require 1 for Region 1, 2 for Region 2 etc.
Turn the player on
Open the tray and play the disc of your choice
Note: that the Region code entered is stored when the player is switched off, therefore you will need to change Region for each disc. However it maybe that entering '0' for the Region code will set the player to Region free operation.
HARMANKARDON DVD-10, DVD-20, DVD-25, DVD-50Turn the player on
Wait until 'No disc' is displayed
Press the buttons 3, 1, 4, 1, 5, 9 and 2 on the Remote Control
The press 1 for Region 1, 2 for Region 2, 3 for Region 3, or 4 for Region 4 etc.
The display should now show 'Power On'
HARMANKARDON DVD-22Remove any discs from player
Put player in Standby mode
Keep Clear on remote control pressed while powering back On
Press OSD on remote to bring up menu
Enter the following code on remote: 3, 1, 4, 1, 5, 9, 0 to select region free mode (or instead of the last digit 1, 2, 3 or 4 to select region 1, 2, 3 or 4)
The player now resets and is region free (or in one of the selected regions)
To bring player back into original factory mode repeat steps 1, 2 and 3
HARMANKARDON DVD231) Switch on the player
2) Make sure no disc is in
3) Push the OSD key
4) Select Setup
5) Enter code 3141590
6) Display returns to normal
Note: last digit is for region number. 0 means region free.
HARMANKARDON DVD27, DVD301. Turn player on with empty disc tray
2. Wait until display shows NO DISC
3. You may have to press SETUP on your remote
4. Press the code 3141592 on the remote
5. Now press 1 for region 1, 2 for region 2 etc.
6. Display should now show POWER ON
HARMANKARDON DVD31Power on the player
Press OSD, go to Set-up, enter
Press 3141590, set-up menu disappears and it's region free.
Don't press the clear button, you have to start over again
HARMANKARDON DVD47Turn the player on and make sure that there is no disc
1. Press OSD on your remote
2. Press 3141590 there 0 is region 0 (region free)
The menu disappears and your player is now region free.
HARMANKARDON DVD51)Put the player into Standby mode with and ensure there is no disc in the tray
2)Key in the following on the Remote Control: 3, 1, 4, 1, 5, 9, 2
3)Now key in the number of the Region you require 1 for Region 1, 2 for Region 2 etc.
4)Turn the player on
5)Open the tray and play the disc of your choice
Note: that the Region code entered is stored when the player is switched off, therefore you will need to
change Region for each disc. However it maybe that entering '0' for the Region code will set the player to
Region free operation.
HARMANKARDON DVD506Ensure there is no disc in the tray.
Put player into standby.
On the remote control press clear while switching player on.
Press OSD to bring up the screen menu.
Enter the code 314159 + region no. ie 3141591 for region 1 etc - '0' for region free.
*If at any time after a code change the player is in standby and the clear button is pressed when the player is
turned on, the player will revert back to the original code of sale
If one of these hacks does work for you then GREAT! please leave
us feedback and let us know on our
forum :) However, If
you have tried and tried this hack till your blue in the face and
you STILL cant get that region 1 copy of 'Michael Flatley's Lord
of the dance' to work then you still have a few options:
Use DVD hacks to search all other internet resources for your hack by entert your player model number below:
Post your problem on the forum and we will try and help.
Alternatively, choose another manufacturer from below: