BUSH DVD 2004
Turn the system on and place a DVD in it, play the DVD, then press stop,
resume stop should appear, then press set up on your remote control, a set
up display should appear on your screen. which has Language, Scart out,
Audio, TV.Type, TV.Sys, with options chosen next to each one, press down on
the remote untill TV.Sys is highlighted, mine was set as PAL60, press
select, to change the setting from PAL60, to one of the following (PAL60R -
AUTO - NTSC - PAL) choose AUTO to make it region free, or NTSC to play
region 1 discs, or just change it back and forth when wanting to play a
different region disc.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2002
To convert this player to Multi-Region
1. Press the Open button on your remote control to open the drive tray
2. Press the buttons 2, 0, 0 and 1, in order and one at a time on your remote control
3. Your player should now be multiregion
To convert this player to Multi-Region on older firmware
1. Press the Open button on your remote control to open the drive tray
2. Press the 7 button on your remote control
3. Press the 7 button again on your remote control
4. Press the Enter button on your remote control
5. You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free by entering 13 as the country code.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2000
To convert this player to Multi-Region
1. Open the disc tray
2. Place a region 1 disc in the tray, but don't close it
3. Press the buttons 0, 1, 2 and then 3 on your remote control in order, one at a time
4. Press the play button on either your remote or the player
To return this player back to Region 2 only and its factory default settings
1. Open the disc tray
2. Press the Zoom button on your remote control
3. Press the Return button on your remote control
4. Your player should now go into Standby mode
5. Press the Power button on your remote control
To return this player to Region 2 only (alternative method)
1. Open the disc tray
2. Place a region 2 disc in the tray, but don't close it
3. Press the buttons Return and then Play on your remote control in order, one at a timeMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-102
Open up the tray. Press 2, 0, 0, 1 and then ENTER. This will bring up a region-coding page. Select the required region code then press OPEN/CLOSE.
Taken From: DVD Player Handset Hacks List (Region 2)MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2000
Open up the disc tray and place a region 1 disc on it. Don't close the tray. On the remote control press 0, 1, 2, 3 and then PLAY. The DVD-Player is now set to region 1. To get it back to region 2, open up the tray and place a region 2 disc on it. Don't close the tray. Press RETURN on the remote and then PLAY.
Taken From: DVD Player Handset Hacks List (Region 2)MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD1005
1. Press the Open/Close button on your remote control to open the disc tray.
2. Using the remote control, press the buttons 3, 3, 0, 8 and 8, in order, one at a time.
3. Using the remote control, press the 1 button for region 1, 2 for region 2, and so on, or 0 for multi-region playback.
4. Press the Open/Close button on your remote control to close the disc tray.
5. The on-screen display will now indicate the currently selected region.
This method may not work on the 1005/A model.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD2023, 2024
1. Press the Open button on your remote control.
2. Using the remote control, key in the following: 2, 8, 1, 2.
3. Press the Close button on your remote control.
To playback VCD and SVCD discs on this player
1. Insert the VCD/SVCD disc into the drive tray and close it.
2. Using your remote control, press the Goto button repeatedly until the menu says VCD at the top of the screen.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD2008A
1. Press the Open button on your remote control .
2. Using your remote control, press the buttons 3, 3, 0, 8, 8 and the region number you require (eg 1 or 2), or use 0 for region free, in order, one at a time
3. Press the Play button on your remote control.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD2005, DVD2009
1. Power on your player.
2. Using the remote control key in Open/Close, Zoom, A/B, Up, Left, Down, Right.
3. The DVD player may show a Region Free message, powering off/on your player does not remove the region free settingMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-102
Press the Open/Close button on the players Remote Control to open the drive tray.
Press the buttons 2, 0, 0 and 1 on the Remote Control.
Press the Enter button on the Remote Control
You will now enter a hidden Setup page, and can change the player to any Region. To set it to Region Free enter 13 as the country code. You can also disable Macrovision from this menu.
Press the Open/Close button on the Remote Control to close the drive tray.
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-1000, DVD-2000
Open the DVD players tray.
Place a Region 1 disc in the tray, but don't close it.
Press the buttons 0, 1, 2 and then 3 on your remote control in order, one at a time.
Press the Play button on either your remote or the player
To change the player back to Region 2 only functionality:
Open the DVD players tray.
Place a Region 2 disc in the tray, but don't close it.
Press the buttons Return and then Play on your remote control in order, one at a time
If the multi-region hack fails to work on the Bush DVD-2000 then try:-
Open the tray using the button on the player fascia
Using the remote press 7, 7 and Enter
The set-up page should now be indicated
Change the region to 13 to make region free, MacroVision can also be disabled from this menu.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-1005
Press 3, 3, 0, 8, 8 and Enter
The screen will display chosen region, eg R2
You can also try this if the above fails:
Open draw with remote
Key in these numbers, (with a pause to let the 'hand' icon go away in between each) 3, 3, 0, 8 and 8
Key in the region number required; eg 0 for multiregion or 1 for USA
Close drawer with remote.
TV screen should show the region selected in bottom left cornerMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2002
Press the Open button on your remote control to open the tray.
Press the 7 button on your remote control.
Press the Enter button on your remote control.
Press the 7 button again on your remote control.
You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free by entering 13 as the country code. You can also disable Macrovision from this menu.
You can also try this if the above fails:
Press Open on the Remote Control
Press 2, 0, 0 and 1
The player should now be in Multi-Region mode
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2004
Press the Open button on your remote control to open the tray.
Press the 7 button on your remote control.
Press the Enter button on your remote control.
Press the 7 button again on your remote control.
You will now enter the hidden setup page, and can change the player to any Region or set it to Region Free by entering 13 as the country code. You can also disable Macrovision from this menu.
You can also try this if the above fails:
Press Open on the Remote Control
Press 2, 0, 0 and 1
The player should now be in Multi-Region mode
If you have the A revision of this player try:
Open the tray type in and from the Remote key in 3, 3, 0, 8, 8
Then press 1 for Region 1, 2 for Region 2 etc. Use 0 for all Regions
Close tray to complete
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2005, DVD-2009
Power On your player
Press Open/Close on the remote
Press Zoom
Press A/B
Press Up, Left, Down, Right
The DVD player may show a region free message, powering off/on your player does not remove the region free setting
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2008
Open the DVD door by pressing Open on the Remote
Key in 3, 3, 0, 8, 0 with the number pad on the Remote
Press Play on the Remote, and the DVD door will close
The DVD player is now Region Free
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2023, DVD-AV14KXI
This player should be region free straight from the box
If the player fails to be multi-region then you may wish to try the following instructions:
Press the Open button on the remote
Using the remote press 2, 8, 1 and 2
Press the Close button on the remote
For VCD playback:
Put a VCD in tray and Close
Press the Goto button repeatedly until the VCD menu appears
Press Stop
Press the Goto button - a time bar should appear
Press 0 then PlayMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2035, DVD-2035XI
Turn On the player
Press Setup
Enter 1, 3, 6 and 9
Press Left, Left, Left and Right
A new entry appears in the Setup menu called Version where you can change the region code with the Up and Down arrows. Changing this value to 0 sets the player region free
Thanks to Mark for the information
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2037
Press Open and then Setup
Press Next, Previous, Next and Previous
Scroll To Ver 255
Press Close
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2040, DVD-2045
Press Open tray.
Press 2, 8, 1, 2 and Enter
You will now be in the manufacturers settings
Select the required region, by pressing Enter. The region will be shown at the top of the screen; 1 = region 1, 2 = region 2; etc; 9 = multi region
Press Close trayMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD-2523
Turn On the player and Eject the disc tray
On the remote press 2, 8, 1, 2 followed by Enter
This gets you to the engineers menu
Press Down until you reach COUNTRY CODE and press Enter
The current region code will change to four dashes (----)
Input one number (0=Region Free, 1=USA 2=Europe, etc) and press Enter again
The new region code will now be displayed. You can exit by just pressing the Eject button once moreMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVRHS02
Note: Player may need a firmware update
Push Setup button on the remote
Select System Info on the menu
Enter 1, 1, 0 and 1 on the remote
It will show the region code
Push 0 on the remote for region free
MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD141TV, DVD141RC
Turn the TV On
Press TV/AV/DVD button twice to get to DVD screen
Open the tray
Press Stop
Enter 1, 9, 9, 9
A new menu will appear allow region selection
Close the trayMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH AV-11K, PDVD-0706
Open the DVD tray and ensure in stop mode
Now press Setup, Next, Prev, Next and Prev
On screen you will see VERSION 2
Select 255 for Region Free
Press Setup key to save settings
If this doesn't work with your remote try using the DVD from panel keys
VCD Playback:
Press Setup on the remote
Now press Next, Prev, Next and Prev
Ver should appear in the top right
change 3001 to 3000
change 5001 to 5000
VCD and SVCD playback is now enabledMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH 2039
1. Press 'OPEN'
2. Press 'PROG'
3. Press 'ENTER' 3 times
4. Use up/down to select region
5. Press 'STOP'MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH 2043
Power up - display is only via TV screen
Open disc tray
Press Setup
Go to preferences using Left/Right arrows
Press 2, 8, 1, 2 in sequence
Popup appears showing region and firmware version
Use up and down arrows to select region 0 for multi region
Press setup to exit the menu
Press open to close the trayMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH 2049
To unlock this dvd player, open the disc tray and type 9735 on the remote. It will bring up a setup screen.
Change the region to region 0 and you'll be region free.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH 2054
1. Open disc tray and enter with the remote: 2,8,1,2 then press the number of the region you require.
i.e. press 2,8,1,2,1 for region 1.
The region number should appear on screen if done correctly. 28129 or 28120 should make your player
region free.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD 143TV
Press DVD/TV button
Press DVD button
Press open tray button
Press setup
Press navigation arrows in order: right, left, down, up
Press display
Region code screen now appears with current region highlighted
Press 0 (the word ALL appears)
Press enter
Player is now multi-region
You can of course press 0-6 for specific regionsMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD AV7
Open tray and press 33088 on remote followed by 1 for region 1, 2 for region 2 and so on.
Follow with 0 for multi-region.
Bottom left of screen will display region chosen.
For VCD/SVCD playback.
Open tray and press 83119 on remote.
You will see VCD displayed in bottom left of screen.
Press enter on remote to load CD.
All VCD/SVCDs will now play. Code remains active until power removed from unit.MULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD AV11K
1. Open the dvd tray and be sure to be in 'stop mode'.
2. Press setup key.
3. Press next, prev, next, prev
4. On screen you will see your current version in the top right hand corner.
5. Select 255 for region free using the left and right buttons
6. Press setup key to save settingsMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVD HS1, DVD HS4
1. Press the DVD button on the remote control to select the DVD functions on your player
2. Press the OPEN button on your remote control to open the disc tray
3. Using the remote conrrol, press the buttons 0, 5, 2 and 0, in order, one at a time
4. Press the UP button on your remote control
5. Press the DOWN button on your remote control
6. Press the LEFT button on your remote control
7. Press the RIGHT button on your remote control
8. You should now be able to change the region to 1 for region 1, 2 for region 2, and so on, or 0 for multi-
region playbackMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
BUSH DVDR3000
OPEN DISK TRAY, MAKING SURE IT'S EMPTY
CLOSE DISK TRAY
PRESS TV/DVDR
PRESS RETURN
PRESS DISPLAY
ENTER 8880
MESSAGE APPEARS ON SCREEN SAYING REGION-FREEMULTI REGION DVD PLAYERS CAN BE BOUGHT ONLINE FOR JUST A FEW POUNDS. CLICK HERE FOR MORE
If one of these hacks does work for you then GREAT! please leave
us feedback and let us know on our
forum :) However, If
you have tried and tried this hack till your blue in the face and
you STILL cant get that region 1 copy of 'Michael Flatley's Lord
of the dance' to work then you still have a few options:
Use DVD hacks to search all other internet resources for your hack by entert your player model number below:
Post your problem on the forum and we will try and help.
Alternatively, choose another manufacturer from below: